Digga 2DSS Auger Drive with SSQA Cradle
Skid Steer Hydraulic Augers
Skid steers have been using hydraulic augers for decades, and with great reason. The power that thee machines can put into the ground is amazing, and makes short work of digging deep and often wide holes in seconds or minutes, a task that would have taken an entire crew hours or days to perform with shovels. Hydraulic augers also have the capability of turning in reverse, something that PTO augers are not able to do, this helps when the flighting of the auger bit becomes stuck under roots, rocks, or other underground obstacles that the operator wouldn't normally be able to see.
Digga has many options of skid steer hydraulic augers for many different machines. One of the most important specs you will need to decide which auger is best for you is the GPM or Gallons Per Minute. If you have the GPM of your skid steer, you want to select a drive where your machine specific GPM is in the upper range of its recommended GPM, this will give you the best torque and RPM for your machine.
The chart below will be very helpful in selecting the auger drive for your machine, however if you need further assistance call Digga's number one dealer in the US EverythingAttachments.com at 1-866-581-5818
| SPECS | 1DSS | 2DSS | 3DSS | 4DSS | 4DDS | 5DDS | 6DDS |
|---|---|---|---|---|---|---|---|
| TORQUE (FT-LBS @ 3000 PSI | 1,467 | 2,254 | 2,829 | 3,275 | 3,583 | 3,903 | 4,909 |
| MAX TORQUE FT-LBS @ 3500 PSI | 1,712 | 2,630 | 3,300 | 3,821 | 4,180 | 4,553 | 5,728 |
| RECOMMENDED FLOW (GPM) | 6-16 | 10-26 | 10-30 | 10-30 | 10-36 | 10-36 | 12-36 |
| MOTOR TYPE | Eaton | Eaton | Eaton | Eaton | Eaton | Eaton | Eaton |
| MAX PRESSURE - DO NOT EXCEED | 3,500 PSI @ 16 GPM | 3,500 PSI @ 27 GPM | |||||
| MAX FLOW - DO NOT EXCEED | 30 GPM @ 1,800 PSI | 42 GPM @ 3,100 PSI | 55 GPM @ 1,700 PSI | ||||
| MAX HORSE POWER | 33 | 33 | 34 | 34 | 55 | 55 | 55 |
| PRESSURE RELIEF VALVE | N/A | N/A | N/A | N/A | Included | Included | Included |
| STANDARD OUTPUT SHAFT | 2" Hex | 2" Hex | 2" Hex | 2" Hex | 2" Hex | 2.5" Hex | 2.5" Hex |
| RECOMMENDED AUGER | A4/RC4 | A4/RC4 | A4/RC4 | A4/RC4 | A4/RC4 | A6/RC6 | A6/RC6 |
| MAX AUGER DRILLING (CLAY / SHALE) | 12" | 24" | 24" | 24" | 24" | 24" | 30" |
| MAX DRILLING DIAMETER EARTH | 24" | 30" | 30" | 30" | 40" | 40" | 40" |
| WEIGHT (lbs) | 101 | 123 | 123 | 125 | 180 | 290 | 290 |
| OVERALL LENGTH (IN) | 24.5" | 25.9" | 25.9" | 25.9" | 29" | 33.7" | 33.7" |
| DIAMETER | 7.4" | 9.4" | 9.4" | 9.4" | 9.4" | 11.4" | 11.4" |
